
Accuracy for Constantan Coil ±0.05% to ±0.1percentage and for Manganin Coil ±0.02percent to ±0.05percent View Details

Selection is by means of terminals provided with common. View Details

The individual decade are series connected in two dials, Three dials & four dials. View Details

The 4-Ratio P.O. Box has sixteen coils as above and two proportional arms each with coils of 1, 10, 100, 1000, ohms. View Details

New innovation to provide resistance box as lower price. Exclusive product of Laboratory Equipments Ambala that offers both Economy and Accuracy. View Details
Wire.jpg)
The sliders contacted with Phosphorous-Bronze contact. These have double contact system and move smoothly on the sliding rod. View Details

The sliders contacted with Phosphorous-Bronze contact. These have double contact system and move smoothly on the sliding rod. View Details

The ends gaps are closed by removable Copper Binding pieces which are held in position by the terminals. View Details

A knife edge jockey is also supplied. It consists of a wooden base with brass blocks View Details

A heavy lock type brass plated terminal is provided for connection with Lead. View Details

Board Type - Single Sided Base - Plastic Transparent View Details

Board Type - Single Sided Consists of cell holder, buzzer, connectors, fan, fuse View Details

Hoffman Voltameter to demonstrate that H2O consists of two volumes of Hydrogen and one volume of Oxygen View Details

Supplied in pairs, red and blue painted with keepers. Laboratory Equipments ambala made up of Chrome Steel View Details

Alnico magnets of superior strength are supplied in pairs with keepers. View Details

Chrome Steel magnets with moderate strength. Laboratory Equipments Ambala Supplied in pair with keepers. View Details

Alnico Magnet of superior strength, comes in pairs, with keepers. View Details

Laboratory Equipments Ambala made up of chrome steel with moderate strength, with keepers View Details

Alnico magnets of superior strength, with keepers. Laboratory Equipments Ambala Painted in red. View Details

Laboratory Equipments Ambala Chrome Steel magnets of moderate strength, with keeper. View Details

Alnico, magnets of superior strength with keepers. Centre gap is 18mm. View Details

Ferrite disc magnets. Basic properties include low cost and high coercivity. View Details

Ferrite ring magnets. Basic properties include low cost and high coercivity. View Details

It possesses high power for small sizes and exhibit high resistance to demagnetization. View Details

Magnets are coated with polish. It possesses high power for small sizes and exhibit high resistance to demagnetization. View Details

Magnets are coated with polish. It possesses high power for small sizes View Details
.jpg)
Ceramic, in natural finish. High Field strength. View Details

Comprises of five ceramic ring magnets, 32mm external diameter and a wooden rod on a base overall height 150mm. View Details

This set up is provided on a superior quality sheet metal stand but without weights. View Details

The tube is also fitted with wire chuck and mirror, graduated scales and verniers on sliding weights. View Details

It can be suspended by a steel wire provided at the center of a long frame work provided with circular base View Details

Laboratory Equipments Ambala consisting of a brass Disc about 15 cm diameter View Details

The top of wheel is chrome plated and is marked with a thick line. A pointer is fixed to one of the brackets. View Details

A heavy metal ring of brass and the same outside diameter as the disc is included. View Details
.jpg)
A tall U-shape metal bridge with a split chuck fitted into disc enable accurate suspension and torsion. View Details

Laboratory Equipments Ambala with 2 brass scales graduated 30-0-30 in degrees, mounted on pillar View Details
ApparatusVerticalPattern.jpg)
Upper end of rod (under test) 900 mm length and 5mm diameter is clamped by a 3-jaw chuck View Details

It consists of a stand with knife-edge top. Comprising a metal bar of 100 cm length having width 25 mm and thickness 4.5 mm. View Details

A sharp knife edge with hanger on the beam. Two tilting type mirrors are also provided for this apparatus. View Details

The whole metallic bar is marked with lines. The all lines are separated from each other at a distance of 5 cm. View Details

Two similar hard wood weights are provided. It consists of 120x1.2cm brass bar with pointed ends View Details

When the plate is suspended freely, the two strings will be equally inclined to the horizontal face of the plate. View Details

A 5cm dial frictionless pulley to attach to the end by means of a clamp adjustable to any necessary position. View Details

Provided with trolley for conducting experiments with ease. View Details

Superior quality track in form of grooves with trolley. Made of metal support with wooden track. View Details

Superior quality, adjustable with graduated cast aluminium arc, iron roller, glass plate and scale. View Details

At thick plywood piece of thickness 12 mm. Parallelogram Force Apparatus is similar to the wall type but is intended View Details

The unit is capable to verify the law under different conditions. View Details

A well balanced; machine turned aluminium disc rotating at about its axis and can be clamped on a tripod stand in vertical plane. View Details

Complete with leveling screws, four sliding clamp pulleys, central ring, string and four sets of iron nickel led slotted View Details

Complete with cord and hooks. Without weights. Comprising two polished wooden wheels View Details

The validity of the law of conservation of energy is demonstrated using the Maxwell disk by converting potential into kinetic energy. View Details

This unit can be used either vertically or in horizontal position. View Details

Plane plates for spectrometer work. In valvet lined cases. View Details

These Equilateral Triangular Glass Prisms are great for light experiments and teaching students about the properties of light. View Details

Laboratory Equipments Ambala Made of calcite/quartz with polished surfaces. With optical axis parallel to refracting edge. View Details

Useful for experiements in optics, light refraction & wavelengths View Details

Glass prism reflection Prism’s equilaterals have and also used to disperse. View Details

Magnifying hand lens with white plastic handle in 50mm diameter are useful in viewing objects clearly. View Details

Different diameter lenses available. Superior Type. Hand lens with black plastic case, 75mm View Details

Use this pocket-sized magnifier for reading and close examination of specimens in the field and in the laboratory. View Details

The frosted surfaces are also excellent for revealing the path of light as it passes through the lens. View Details

They offer schools and parents an economical choice for even young students to make close observations. View Details

The set includes one each of concave, convex, double concave, double convex, plano concave, and plano convex lens View Details

Magnification: 5X Focal length: 65mm (2.5″) View Details

These mirrors allow for a simple way to illustrate the principles of reflection. View Details

The Newton’s Rings Apparatus consists of a plano-convex lens on top of a flat glass plate, held together by a plastic frame. View Details

Spring-loaded clips hold specimens in place on the stage, with a sliding barrel focus adjustment View Details

Laboratory Equipments Ambala Demonstrate variable transmission of light or chec stress patterns in plastics View Details
.jpg)
G.I Sheet hammer tone finish, the top edge is flared to add strength. View Details
Plastic.jpg)
Used in Archimedes experiment. Made of polypropylene and non corrosive white colour View Details

It consists of a hollow metal cylinder, upper loading pan and bucket suspended View Details

Comprising three limbed tube mounted on polished stand with meter scale 45 cm with 0 at the bottom. View Details

Mounted on Wooden Base with scale of 15cm on base with meter rule. View Details

Laboratory Equipments Ambala Mounted on Wooden Base to stand on table with scale of 50 cm printed on base or with meter rule. View Details

Set of six different elements in cylindrical form for density in electrical and thermal experiments. View Details

These metal cubes are intended for specific gravity measurements. Set of six different metals. View Details

Comprising a solid turned bobs of different metals Available in three different sizes sphere with a small hook for suspension. View Details
.jpg)
The aluminum plate is provided with a stop cock air inlet screw and a connection for rubber pressure tubing. View Details

It consists of a 2 litre bell jar with a rubber stopper fitted with binding posts and connectors from which an electric bell is suspended. View Details

Low vacuum cum Low-Pressure Double Stage pump to create vacuum through a diaphragm View Details

Two concave aluminum cups having diameter either 62mm or 75 are provided with handle and stop cock View Details
.jpg)
Sheet metal cylinder 400 x 68 mm diameter with three equal size offices art different heights down on side. View Details
.jpg)
When held with the holes in a horizontal plane and piston is pushed in, water will stream out at the same distance from each hole. View Details

To explain Bernoulli theorem by observing the variation in the pressure and speed of flow of an incompressible fluid through a tube with respect to the tube bore or cross-section. View Details

A vertically adjustable index pointer is provided to adjust liquid level in the vases. View Details

It consists of four differently shaped glass tubes connected at the bottom, mounted on a bakelite stand. View Details

To show difference in expansion of various liquids over the same temperature range. View Details
.jpg)
Mercury reservoir tube mounted on vertical support rod with the help of sliding bracket View Details

A short length of the rubber tubing with two pinch clips of on short length of glass tubing View Details

There is a oil chamber with Bourdon gauge at the top, graduated 0 - 3.4 x 105 Nm-2 and has a valve on one side for connection to air compression pump. View Details

Used to measure actual gas pressure, and not gauge. Consist of a circular gauge. View Details

Working model made of glass, consist of a cylinder and piston provided with non-return float valves and a side tube for outlet View Details

Consist a glass cylinder with a non-return float valve at its lower end with a outlet side tube View Details

It apparatus consist of the plated cylindrical tubes of different diameters fitted with piston and connected View Details

Demonstrates the kinetic theory of gases and associated phenomena such as thinning of air with increasing View Details

Case: Clear Transparent case with white ABS base Scale Length: 50 mm (approx.) with knife edge pointer with or without anti parallax mirror scale. View Details

A galvanometer is an electromechanical instrument for detecting and measuring electric current. View Details

An ammeter is a measuring used to measure the current in a circuit. View Details

A voltmeter, also known as a voltage meter, is an instrument used for measuring the potential difference View Details

Case: ABS plastic panel with wooden box Accuracy: ± 1 FSD View Details

It is housed in unbreakable ABS case with clear transparent front cover and operated on 1.5V AA cell. View Details

Accuracy: ±2.5 FSD Overall Size: 140x140x45 mm (approx) View Details

Stand: Wooden Scale Length: 80 mm (approx.) Demonstration Vertical Meter is designed to demonstrate View Details

Accuracy: ±2.5 % FSD Scale length: 200 mm (approx.) View Details

Provision for effectively damping any transverse suspension vibrations, without affecting the electrical characteristics of the instrument. View Details

This galvanometer has been designed for very low current measurement. View Details

You can use this meter as a voltmeter and as an ammeter, simply by sliding the scale. View Details

Its working is based on the principle of the tangent law of magnetism, which states that when a current is passed View Details

The apparatus is used to study and verify the ohms law. The Instrument comprises of the following View Details

The ball passes through the ring when cold but will not pass through after being heated. View Details

It includes a metal bar mounted on rod with insulated handle and a U-shaped metal gauge also mounted on an insulated handle. View Details

The whole apparatus is of metal. With engraved scale. View Details

A metal rod is inserted into the steam chamber and steam is applied. View Details

Fitted in wooden case lined with felt. Consisting of cylindrical copper rod with its one end surrounded View Details

A hole for thermometer is drilled radially in each and the cylindrical brass slab is fitted with eyelets View Details

Two terminals are connected to coil of wire for passing current. View Details
.jpg)
The heating element is a coil about 40cm long of nichrome wire and is wound spirally inside along the axis of the glass tube. View Details

The level cannot rise above a central overflow tube in the chamber. View Details

A rotating cast aluminium cylinder rotates freely on a cast metallic pedestal and to its axle rotating vanes View Details

It consists of a glass reagent bottle of 10 litres capacity fitted with leak proof brass cap. View Details

It rotates with minimum friction, and is balanced to avoid bias towards any particular direction. View Details

Comprises of three light-weight hemispherical plastic cups attached to a central hub through lightweight spokes. View Details

The vertical spindle carries three cups which rotates on ball bearings and gives digital display. View Details

The vertical spindle carries three plastic cups, which rotate on ball bearing and gives reading through meter. View Details

Direct Reading Digital Display Automatic power off Long life battery View Details
.jpg)
Supplied in case with a ceiling bracket, constant weight and suitable wire. Without weights. View Details
.jpg)
Complete in case with wire Ceiling attachment and constant cast iron weight. View Details

It consists of 30cm long mirror scale, spring, slotted weights with hanger and pointer, complete on stand. View Details
.jpg)
One can find the modulus of rigidity and Young's modulus for the material of wires by Searle's method. View Details

It consists of a cycle rubber tube of about one meter length with a small pointer on a heavy cast iron stand. View Details

The apparatus comprises a metal frame, on which four capillary tubes of 10cm long and of different internal diameters View Details

Maximum height capacity – 12 inches. View Details

It comprises a circular metallic plate with three leveling screws and a sensitive spirit level. View Details

Fitted on tripod stand with leveling screw. View Details

Complete with manometer, capillary tube. All mounted on suitable wooden stand. View Details

A Borosilicate glass tube of about 30 cm diameter and one meter long is made to stand vertically firmly View Details

The outer cylinder can be clamped at any desired height and the inner cylinder is graduated in mms and slot is covered by a transparent cover. View Details

To show the internal structure skull cap, lungs, stomach, liver, intestine etc. can be removed. View Details

Laboratory Equipments Ambala 24 parts like removable head, heart, stomach, intestines, etc View Details

Helps to understand the external features and internal structures of the heart View Details

To show the internal structure Brain, skull cap, lungs, liver, stomach, intestine etc. View Details

Appropriately coloured, nicely finished and numbered with key card. View Details

Appropriately coloured, nicely finished and numbered with key card. View Details

Appropriately coloured, nicely finished and numbered with key card. View Details

This model shows the internal organs like half of the brain, one eye with muscles and optic nerves View Details

It features an exposed spine with removable vertebra and spinal cord segment with interchangeable View Details

The outer layer is made of rigid plastic and could be dissectible into front View Details

Shows the outlook of automatic nervous system, including sympathetic. View Details

This model shows the central and peripheral nervous system to demonstrate the study of human nervous system. View Details

This model contains removable parts like: 2 parts larynx, trachea with bronchial tree View Details

This model is dissectible in 4 parts showing the position of lungs, diaphragm and heart. View Details

This model is divided into two parts showing bronchioles connecting to alveolar ducts. View Details

The distributions of the bronchial tree can be observed through the transparent lungs. View Details

Constructed of two rubber balloons, rubber stopper and bell jar. View Details

This model showing parts of brain, nasal cavity, bronchial tree, lungs, position of heart. View Details

Demonstrates the respiration realistically by the movement of the rib cage and diagram. View Details

Shows thoracic organs include two part larynx, two part of heart, vena cava aorta View Details

This model shows larynx, windpipe, ligaments, muscles and thyroid gland View Details

Human Larynx Model is of full size divided into 2 parts showing muscles, thyroid glands View Details

The model shows the small branches of principal bronchus: Section of bronchiole of no cartilage. View Details

This model is mounted on a base, appropiately coloured and nicely finished. View Details

This heart model is divided into two parts showing internal and external anatomy including valves, cardiac View Details

Laboratory Equipments Ambala Both ventricles and atria are open to expose the valves View Details

The model showing superior vena cava, pulmonary artery, pulmonary veins, ascending arota View Details

Squeeze bulb pumps simulated blood through clear heart chambers just like real one. View Details

The wall of heart is made of flexible material which can demonstrates the heart beating by the mechanical power behind it. View Details

Life size on stand with base. Size : 40x12x12cm View Details

Human Circulatory System Model shows the vascular system, human skeletal structure consisting of the arterial/venous View Details

This model showing the whole digestive system i.e nose, mouth cavity and pharyngs, oesophagus View Details

Digestive system features : nose, mouth cavity and pharynx, esophagus, GI tract View Details

Human Intestinal Villus Model comprises longitudinal section villus showing the arterioles View Details

Duodenum showing its internal structures and the position of the pancreatic ducts as well as vessels. View Details

An economical way to study the basic structures of the spleen, liver, blood vessels and pancreas. View Details

This model showing 4 lobes with Gall Bladder, extra hepatic ducts and hilus vessels. View Details

Human Liver Model showing the Liver, Gall Bladder, Left Hepatic Duct, Cystic Duct, Duodenum View Details

This model showing the internal muscles i.e both the longitudinal and circular muscle layer View Details

The model shows the structures of the gastric folds, pyloric sphincter muscles View Details

Shows wall of the caecum and appendix. Made of advanced PVC. View Details

Shows the component and structure of the lymphatic system View Details

This 3 layer model shows the hair covered skin of the head representing hair follicles with sebaceous glands View Details

This model is not dissectible. Male pelvis showing internal and external reproductive organs View Details

Laboratory Equipments Ambala Life size, right half of the pelvis showing female reproductive organs View Details

With a median section, both internal and external organs are clearly shown. View Details

With a median section, both internal and external organs are clearly shown. View Details

Apropriately coloured and numbered with key card. On base. View Details

Kidney is divided into two removable parts: The front half enable the study of cortex medulla calices and cortex. View Details

The third model of a glomerulus shows the Bowman capsule, afferent and efferent arterioles, capillaries and podocytes. View Details

Showing urinary bladder, kidneys with ureter, adrenal glands, bladder with prostate View Details

The kidneys vasculature, A section of ribs, Vertebrae and portion of the pelvic bones along with muscles View Details

This is intended to understand the external features of the urogenital system View Details

The model shows kidney, ureters, urinary bladder, vagina, uterus, accessories of uterus View Details

Laboratory Equipments Ambala shows the penis, prostate, bladder, seminal vasicle, spermatic cord and inguinal canal and base. View Details

It shows internal and external female genital organs. Dissected and mounted on a stand. View Details

The renal calices, the renal pelvis and the ureter are opened to identify the position View Details

Shows ventral side, brain stem and spinal cord. Branches up to the coccygeal plexus View Details

This model replicates a segment of the upper thoracic spinal cord at six times life size. View Details

Laboratory Equipments Ambala Mounted on board. Appropriately coloured with numbered key card. View Details

It is standing type with metal rod. Laboratory Equipments Ambala Model consisting of fixed DNA segment. View Details

An easy-to-assemble DNA model, this stunning recreation consists of specially shaped, brilliantly-colored plastic pieces. View Details

Each of the four nitrogeneous bases comes in a different unlabeled color, so students can design their own pair ciding. View Details

The components consist of four nucleic and bases : adenine, cytosine, guanine and thymine View Details

An excellent kit for one or two student to build a double helix of DNA, and to learn replication of DNA. View Details

All components are identified by different colors. The connections between the base pairs are also clearly shown. View Details

This depicts how the lungs are emptied and filled with air by the relaxation and contraction of the diaphragm muscle. View Details

Laboratory Equipments Ambala, The life size model of skeleton duly articulated and made up of a mix of clay and fiber glass. View Details

The life size model of skeleton duly articulated and made up of a mix of clay and fiber glass. View Details

Features nerve branches, vertebral artery and hamiated lumbar disc. View Details

On Plastic stand with metal rod. Height of about 30cm. View Details

Mini Human Skeleton Model. Laboratory Equipments Ambala Real life model consist of durable parts View Details

It is a visual aid for instructions of anatomy to students, doctors, nurses or anyone interested in human skeleton. View Details

All removable parts including all limbs, rib cage, two part heart, liver, stomach, lungs, small and large intestines. View Details

Rod supported. The left hand side is painted to show the muscle origins in red and insertions in blue. View Details

Depicts the position, course and distribution of main arteries and peripheral nerves. View Details

Made of a mix of fibre glass and clay. Numbered with key card. View Details

Dissectible into 3 parts. This economical life-size adult plastic skull features a moveable jaw, suture lines View Details

This can be disassembled into 3 parts. Life-size skull, bones painted in different colors View Details

The basal portion of the skull has been sectioned sagitally, displaying all 3 sinuses. View Details

The mandible is spring hanged to view the bone structures of the mouth. View Details

A whole set. Human Infant Skull Model. View Details

To illustrate abduction, anteversion, adduction, retroversion and internal/external rotation. View Details

Demonstrates flexion, extension and internal/external rotation of the radius. View Details

Biceps and triceps are made of flexible material, extension abd flexion can be shown View Details

Laboratory Equipments Ambala Made of PVC plastic. Life size. View Details

Including flexible artificial ligaments. Made up of PVC plastic with natural size. View Details

Demonstrates anteversion, abduction, retroversion and internal/external rotation. View Details

Includes flexible artificial ligaments. Life size on stand. View Details

Shows all significant features of each vertebra, including spinal cord, nerve roots View Details

A fixed type to show the general features of the knee joint. View Details

These model sizes are just the same as realities and made of PVC Plastic. View Details

Life size Lumbar Vertebrae are shown with normal intervertebral disc, spinal cord View Details

The skull has a calvaria cut and a spring-held lower jaw. Life size. View Details

Each foot has 23 numbered parts. Lift size, finely detailed models of the foot depicting a flattened foot View Details

Fully flexible joint to demonstrate abduction, retroversion and internal/external rotation. View Details

These model sizes are just the same as realities and made of PVC Plastic. View Details

Mounted on a sturdy metal rod. Life size lumbar vertebrae are shown with normal intervertebral View Details

Made of PVC Plastic Life size. View Details

Consists of an occipital bone of the skull, 7 cervical vertebrae with intervertebral disc View Details

Life size. With sacrum and coccyx and herniated disc. View Details

Showing the osteoporosis and blood vessels. Size : 18x14x18cm View Details

Flexibly mounted on stand, removable. Consists of 12 Thoracic vertebrae with inter-vertebral discs View Details

On stand removable. Consisting of the 5 lumbar vertebrae with intervertebral View Details

Mounted on a base, appropriately coloured and numbered with key card. View Details

Mounted on a base, appropriately coloured and numbered with keycard. View Details

Material: Plastic Mould For: Medical View Details

This model shows all relevant structures in great details. Size: 19x18x6 cm View Details

This 2 part brain is divided into the right half and left half. View Details

This 4 part brain is medially divided into, the right half which is further divided into frontal View Details

This enlarged model that shows structure of the nose. Mounted on stand, appropriately coloured View Details

This medially divided brain model shows the brain as well as frontal with parietal lobes View Details

Mounted on the base, appropriately coloured and numbered with keycard. View Details

The base segment of the 12 pair of brain nerve are shown in yellow. View Details

The arterial supply of the brain: sources, vertebral, internal carotid arteries, arteria supply of the cerebellum and cerebrum. View Details
.jpg)
The eyeball has a horizon cut, the upper half of eyeball wall and the inner structures can be removable. View Details

Nasal Cavity : on the lateral nasal wall show the superior, middle and inferior nasal chonchae project View Details

Laboratory Equipments Ambala Mounted on stand, appropriately coloured and numbered with keycard. View Details

The spinal cord contains white and grey matter, sulci, ganglion and fissures. View Details

The tympanic membrane with malleus and incus are also removable. View Details

Laboratory Equipments Ambala Mounted on base, appropriately coloured and numbered with keycard. View Details

Consisting of dissectible 5 parts. Ideal for explaining hearing mechanism. View Details

Laboratory Equipments Ambala Made of PVC Plastic. Dissectible in 6 parts. View Details

The jaw is dissected to show roots, nerves, and vessels. The model of a lower left jaw View Details

This model is 3 times enlarged and divided into six parts. View Details

The eye itself is horizontally sectioned, and the sclera with clear cornea and muscles are removable. View Details

Mounted on a base, appropriately coloured and numbered with key card. View Details

With tooth brush. Human Teeth Model, Dental Care. View Details

Mounted on a stand, appropiately coloured and nicely finished. View Details

Laboratory Equipments Ambala Model with Hinge. Enlarged 1.5 times. View Details

Includes lower premolar tooth(1 parts), lower incisor tooth(2 parts), lower canine tooth View Details

Mounted on a stand, appropiately coloured and nicely finished. View Details

This model shows upper and lower jaw of new born child, 5 year old child, 9 year old child and young adult. View Details

Laboratory Equipments Ambala Mounted on a base, appropiately coloured and nicely finished. View Details

The model is made of hard plastic and sits securely on two metal pegs attached to large display platform. View Details

On a base, appropiately coloured and nicely finished. Jaw with partial skull to demonstrate various View Details

Mounted on a stand, appropiately coloured and nicely finished. View Details

Dissecting Instruments Set consisting of 6 instruments, all made of stainless steel. View Details

Dissecting instruments set consisting of 10 instruments, all made of stainless steel. View Details

Dissecting instruments set consisting of 20 instruments, all made of stainless steel. View Details

Dissecting Kit (Economy) 18 Instruments in plastic box: 1 Forcep, blunt View Details

Stainless steel, total length 150mm Scalpel Fixed, Blade length 35mm and 45mm View Details

Laboratory Equipments Ambala Stainless steel handles slotted to accept standard blades. View Details

Polystrene, autoclavable handles to accept standard blades. View Details

Stainless Steel. Tailor Scissor, Size: 10 inches View Details

Scissor Plastic Handle Scissor Plastic Handle, 6" View Details

Hardwood Handle, Straight Needle Steel, Straight Needle View Details

Dissecting Awl Stainless steel spike with wooden handle. Size: 50mm View Details

Laboratory Equipments Ambala With metal chuck to hold needles. View Details

All stainless steel, blunt end needle. Seeker, Steel, Bent View Details

Section Lifter Stainless Steel with bent-up blade. Single ended. View Details

Dissecting Pins, Brass, Chrome Plated. Dissecting Pins, MS, Chrome Plated. View Details

Flat one side with plastic handle. High Quality Steel. View Details

Soft wood board with raised edges. Laboratory Equipments Ambala Pin can be easily pressed View Details

Made from stainless steel. Rectangular, with flanged edges. View Details

In Sheet with Angular Sides. Types Available: Dissecting Tray, in Aluminium with wax layered bottom surface. View Details

Curette Uterine Sharp and Blunt. Laboratory Equipments Ambala Made of Stainless Steel. View Details

Dental Scaler meets the diverse needs of dental treatments and surgery. View Details

Corrosion Proof and Highly Reliable for Medical Application. View Details

Laboratory Equipments Ambala Made of Stainless Steel. Corrosion Proof and Highly Reliable for Medical View Details

Retractor, Made of Stainless Steel. Retractor Pronged Blunt. View Details

Laboratory Equipments Ambala Made of Stainless Steel. Towel Clip is used to fix drapes View Details

Speculum, Vaginal Sims Double Ended Speculum, Vaginal, Graves View Details
Model.jpg)
The right side shows the feathers and all external characters on other side shows View Details

Skeletal structure, brain, digestive tract, swim bladder, reproductive organs and many other anatomical details are clearly exposed. View Details
Model.jpg)
Model showing the external character in a portion and the dissection in the remaining View Details

A beautiful three dimensional model of frog showing all external characters on the dorsal side View Details

Natural Size, Dissection showing all the internal organs of a pigeon. View Details

A set of 24 models showing the various stages in the development of a frog, from egg to adult. View Details

An enlarged beautiful model of cockroach dissection (male) showing prothorax View Details

An enlarged beautifully coloured model of rat dissection (female) showing head, mouth View Details

Mouth, pharynx, lips, intestine, vagina, female pore, rectum, anus, uterus, oviduct View Details

Colourfully illustrated are the external and internal structure: bud, gastrovascular cavity View Details

A set of 12 models, showing detailed stages in meiotic cell division beautifully coloured View Details

Taenia solium, enlarged many times in one piece showing rostellum, rostral hooks, neck View Details

Enlarged, dissection showing the structure. Mounted on base. View Details

Enlarged view showing all the important parts like cytostome, stigma, reservoir View Details

Sclistocerca gregaria - The desert Locust. Numbered with English key card. View Details

Emphasizing the base pair sequence and function of DNA, the sturdy, colorful bases snap together View Details

Model showing RNA molecule DNA Template molecule of chromosome, role of messanger View Details

The chromosomes are painted to allow easy identification, completely numbered with English key card. View Details

Its hand-assembled to provide intricate details and long lasting durability. View Details

The model also shows centrioles, lysosomes and fat vacuoles. View Details

Dissecting instruments set consisting of 10 instruments, all made of stainless steel. View Details

With the longitudinal section, the model shows the structures of the gastric folds, pyloric valve View Details

All the main structures of the uterus and foetus are well represented and identified on the accompanying View Details

A fully flexible life size plastic human trunk skeleton consisting of the following features View Details

This 2-part, 5X life size model shows the anatomy of the human fallopian tube and ovary. View Details

Paranasal Sinuses: Shows the frontal, sphenoid and maxillary sinuses. View Details

The fetus is in the normal position prior to birth, showing the anatomical relationship between various View Details

The midsagitally divided brain is cast from an original anatomic specimen. View Details

The Food Calorimeter allows students to work out the number of energy free through the burning of food. View Details

The left side shows the external morphology while the right part, longitudinally sectioned, reveal View Details

Kidney Model 2X Actual Size. Two times normal life size longitudinal section of right kidney and adrenal gland. View Details

This Life Size model represents the major components of the urinary system, plus the vena cava and abdominal aorta. View Details

Feed indicator is in front and fed setting is at back of microtome which sets 1-50 micron. View Details

The apparatus comprises two stoppered glass boiling tubes connected by three way taps to either limbs of U-shaped graduated manometer. View Details

Set of 25 glass microscope with botanical specimens representing the major plant group View Details

Set of 20 glass microscope slides showing the major aspects of vascular plant structure View Details

The Clinostat is supplied with a 70mm diameter cork lined/faced disc with a fitting to take a specimen tube View Details

Laboratory Equipments Ambala Includes detailed teacher and student guides that provide extensive background View Details

Germination Model Activity Set for botanical study. Teacher's guide, with full color overhead View Details

This model provides a visually and kinesthetically effective method for studying the structure and function View Details

Mounted on base. Numbered with English Key Card. View Details

Show students various tissues and vascular bundles in transverse section of monocot stem of maize View Details

All kinds of microscope cover slips are available with us and they all are renowned for their durability. View Details

These autoclavabale vacuum desiccators can hold vacuum up to 740mmHg for 24hrs without greasing. View Details

Laboratory Equipments Ambala providing a qualitative range of Stainless Steel Surgical Scalpel Blade View Details

Set of 12 slides includes various samples from the animal kingdom. View Details

These Glass Dropper made available to you has a rubber teat that is fitted along with Glass Dropper View Details

The Main Unit comprises of digital displays, detector, filters and nebulizer. View Details

The apparatus can also be used to measure humidity by connecting a porous pot. View Details

The open end of the capillary tube is dipped into a beaker of water. View Details

Affordable, easy-to-understand, realistic replica of the molecule of life. View Details

Three sets of output connectors, allowing the user to run up to three chambers simultaneously. View Details

Made from polypropylene which is autoclavable. View Details

The Medical Classic Media autoclave offers a safe method of sterilising View Details

A rubber gasket makes the lid and body airtight with help of tightening bolts and nuts. View Details

Laboratory Equipments Ambala very simple to operate and economical to use. View Details

Thermally insulated and vulcanized polychloroprene (Synthetic Rubber) gasket View Details

The lid is fitted with pressure gauge and double safety valve. View Details

Block heaters provide a safe, dry and consistent method of heating accessory View Details

The new Electric Burner offers a unique replacement option to conventional gas bunsen burners. View Details

Length 1 meter. Laboratory Equipments Ambala With reinforced ends View Details

The 18mm top is excellent for burners with flame stabilizer. View Details

The burner comprises of a perforated mesh plate on a nickel plate burner tube with a tapered bottom. View Details

Heavy wide die cast metal base of 80 mm diam. For high temperature work. View Details

Sleeve- type regulator and stopcock for reliable gas control. View Details

It gives a very hot flame suitable for glasswork and soldering View Details

One piece die-cast base, with gas and air regulators. Superior Quality. View Details

A special micrometer needle valve is used to regulate the gas and a safety cap prevents dangerous back flashes. View Details

Miniature, 9 cm high with fine gas control needle and adjustable air regulator. View Details

With a brass needle valve to adjust gas supply and adjustable air ports to regulate air supply. View Details

The stabilizer top allows gas to emerge at a low velocity in an annular ring acting View Details

A brass threaded needle valve and a rubber O ring for gas regulation, and air vents View Details

Air flow is adjusted by a heavy gauge mixing tube threaded into a heavy die- cast zinc View Details

As Product Code B-10667 but fitted with a stopcock in the inlet tube to control flow of gas. View Details

Safe and quick to use. Provides hundreds of lights. View Details

Safe, no open flame, no fire hazard, no fuel refills, no flint striking, no batteries. View Details

Flexible steel; 5/16". Rubber covered for gas-tightness. View Details

Made of steel wire, chrome plated. Stand has a heavy wire-gauge top. View Details

Tip-resistant alcohol burner uses a copper-plated torch instead of a wick for even heat distribution. View Details

This burner has a metal screw-cap and metal cap for extinguishing flame and preventing View Details

Meker type. Natural Gas. View Details

This flexible neoprene Bunsen burner tubing features reinforced ends that provide safe. View Details

Stable and durable. Reduce the risk of accidents and fire hazards with this No-Tip Bunsen Burner. View Details

Case construction: Steel, with chemical resistant coating Thermal View Details

The heating mantles are perfect for every day laboratory use. View Details
.jpg)
These have two tier constructions with the upper part consisting of heating element View Details

These heating mantles are made of rolled aluminium body. View Details

These heating mantles are made of rolled aluminium body. View Details

Accurate step-less speed control allows smooth variation up to 1200 rpm. View Details

This Hot plate stirrer heats to 340° and is widely used in chemical synthesis View Details

The Hotplate and Magnetic stirrer is made of stainless steel with a ceramic to coating resist corrosion. View Details

Maximum temperature of top surface can go upto 350°C. View Details

The body is made of die-cast aluminum body and finished with a high-quality anti-corrosion coating. View Details

Maximum surface temp. Approx. 300º C, temp. is controlled by a three position rotary switch. View Details

Heavy duty heating elements to work on 220V AC. View Details

The top surface encloses an 800W heating element. This general purpose hot plate consist of top surface View Details

Capacity: 15mL x 30 30-15 Fix Angle Rotor Fixed Angle Rotor. View Details

The high speed micro-centrifuge is widely used for specimen preparation in molecular and cellular biology. View Details

The Multi-purpose Centrifuge is ideal for spinning samples within the medical, clinical, cytology, chemistry, pharmacy View Details

With a speed range of 300-4500rpm and a maximum rotor capability View Details

The Micro centrifuge is ideal for your laboratory if you are looking to do the following View Details

Laboratory Equipments Ambala Cast metal body, removable crank handle View Details

Microprocessor controlled Preset speed from 2000 to 16000 r.p.m. View Details

With following accessories: Micro Hematocrite rotor to accommodate 24 capillaries of 75 mm x 1mm View Details

Laboratory Equipments Ambala for Clinical & Pathological Laboratories. Suitable for infertility labs where low speed is recommended. View Details

The centrifuge with 5 step speed regulator is provided with fixed angle rotor head. View Details

High quality brushless Motor R.P.M. in steps of 1000 rpm. View Details

The special features include easy lid lock, stepless speed regulator and timer. View Details

The standard unit is fitted with resiliently mounted motor with 3500 RPM for vibration free performance View Details

The centrifuge with 5 step speed regulator is provided with swing out rotor head. View Details

Material: Cast Alloy Flat masses, with large central hole and small View Details

Small format cast alloy mass & hanger set. Material: Cast Alloy View Details

Small format cast alloy mass & hanger set Material: Cast Alloy View Details

Small form slotted mass & hanger set. Material: Brass View Details

Material: Brass Small form slotted mass & hanger set. View Details

Small form slotted mass & hanger set. Material: Brass View Details

Cast Masses Large format slotted mass. View Details

75mm diameter with suspension cords and hook. View Details

A combined set of accurate steel and brass weights that are housed in a sturdy blue moulded tray. View Details

With numerous features and functions, precision balances are suitable for most lab weighing tasks. View Details

Sturdy ABS construction Suitable for many tasks, provides fast, accurate weighing in a number View Details

With simple, three-button operation and sturdy plastic construction, the portable Compact balance View Details

With simple, three-button operation and sturdy plastic construction, the portable compact balance View Details

This magnifying mechanical scale offers compact, affordable value weighing solution with high capacity. View Details

The Student balances have been designed to offer an economical yet comprehensive View Details

This balance features an LCD screen with backlight. View Details

The Analytical precision balance with a capacity of 220g and Resolution of 0.0001g. View Details

Ergonomically styled, the anti-vibration table offers a solid, stable surface developed View Details

With rugged construction and security slot to prevent theft, the durable Triple Beam Balance is ideal for classroom environments. View Details

Easy to read VFD Display Density measurement (Optional) View Details

Auto zero tracking Low battery indicator View Details

Auto Zero tracking, Low Battery Indicator Auto Calibration with External Weight View Details

Die cast aluminum alloy frame, other parts are chrome plated. With leveling screw to set zero and a pointer View Details

Built in rechargeable battery for continues use Rust proof stainless steel platter View Details

Laboratory Equipments Ambala Brass, chrome plated, complete set with light alloy fractional weights View Details

Laboratory Equipments Ambala Brass, chrome plated, in case with lid, complete set with forceps and light metal View Details

The hangers have double hooks for specific gravity experiments. View Details

The beam supports are extended and relieve the agate knife edges when at rest. View Details

Fitted on a wooden board in a polished wooden case. Advanced, Beam engraved with a rider scale View Details

Single pan balance, cap. 311gm x 10mg with 4 beams each provided with a non-removable slider View Details

Laboratory Equipments Ambala Wide view dial, large pan and plastic moulded body. View Details

Laboratory Equipments Ambala simple Model, body made of steel plate and pans are of metal. View Details

With two pans and heavy base. Beam with central knife edge and pointer. View Details

These weigh up to 0-200 gm x 10 gm & 0-10 gm x 0.1 gm, total 210 gm. View Details

Magnetic Stirrer Bar Dimensions: 25 x 6mm View Details

The ultra-thin compact magnetic stirrer, provides mixing and is ideal for physical, chemical, analysis and labs. View Details

The mini stirrer is compact high powered stirrer for general laboratory applications. View Details

Hotplate magnetic stirrer, adjustable stirring time, maximum heating temperature up to 300°C. View Details

It's features include, touch and continuous operation, variable speed regulation from 0-2500rpm. View Details

The high Density glass ceramic top plate offers excellent chemical resistance against strong acids and bases View Details

These are equipped with powerful heating elements providing very quick heating of the samples. View Details

Complete with 2 No. Teflon coated stirrer bar, of size 9 x 25 mm & 9 x 35 mm. View Details

Direction selector (Clock Wise Counter Clock Wise) View Details

An Energy regulator for the hot plate, on/ off switch and continuous speed control for the stirrer motor mounted on the front panel. View Details

Material: Steel Finish: Powder Coated View Details

Transparent polycarbonate safety screen comprising central panel and two side panels View Details

Polycarbonate safety goggles with adjustable strap. View Details

High grade, scratch resistant Polycarbonate lens provides excellent protection from impact and UV rays. View Details

A polished, wooden stand, with four rubber feet, which holds 24 pipettes vertically. View Details

Polished wooden stand, two sided. Material: Wooden View Details

Screw operated, scissor-action mechanism. Strong, stable support for laboratory equipment. View Details

The Multi-Purpose interlocking sink-liner that prevents glass breakages through cushioning View Details

Material: High impact polystyrene Pack Size: 250 View Details

A lightweight hand operated vacuum pump, drawing 15cm3 per stroke, up to a maximum View Details

Being very quiet and with low energy consumption, this rotary vacuum pump View Details

The tube roller has an efficient but gentle rocking and rolling motion. View Details

Easy to use windspeed meter as part of our range of mini environmental meters. View Details

Powder coated aluminium and four breaked castors. View Details

With simple operation and rapid response time, PMB moisture analysers offer the top value in their class. View Details

The 43 Litre Oven is perfectly suited to school laboratory requirements. View Details

The Orbital Digital Shakers provide smooth and quiet motions for mixing in culture dishes, flasks and beakers. View Details

The moisture analyser is a sturdy instrument for the determining of moisture in raw View Details

Our general purpose laboratory incubators are reliable, cost-effective and suit most laboratory View Details

All drying cabinet models have adjustable temperature control up to approx. 50 degree C. View Details

Polypropylene Ductless Mobile Fume Cabinet provide an ultimate protective work View Details

Polypropylene Ducted Fume Cupboard, 1200mm - With Services. View Details

The mobile ductless fume cupboard is a high quality, highly chemical resistant unit View Details

The mobile ductless fume cupboard is a high quality, highly chemical resistant unit View Details

The new vacuum tubing is an affordable and resilient product designed to replace the natural rubber vacuum tubing. View Details

The Melting Point Apparatus is economic and easy-use. View Details

Vapour pressure: Max. 500mbar Viscosity max: 500mm2/s View Details

Coild and dispensing gun for any of the range of deionisers. View Details

Reaction block for 100ml round bottom flask (one flask capacity) View Details

Biological Safety Cabinet Class II A2 protects lab staff, the environment and sensitive work processes in which biological agents View Details

Power Input: 110V AC, 60Hz Power Output: 6VDC, 200mA View Details

Replacement acid filter for Inverted Mobile Fume Hood. View Details

Manual wavelength calibration and selection. Sample holder with 4 position selector control View Details

Auto Karl Fisher Titrimeter having array of LED’s provided with inbuilt stirrer, auto zero burette, adjustable timer View Details

These are used to evaluate oxygen liquefy in water and index of biological and physical processes View Details

Range 40°C to 350°C, readability 1°C. Fully automatic operation. View Details

Battery cum mains operated, complete with accessories, fitted in briefcase. View Details

4 digit LED display Range 0-9999 with 125 memory, hold and count correction facility. View Details

5 filters mains operated with optical density in 2½ digit LED display, Range 400 to 700 nm, 1 ml solution measurement. View Details

The 8 Litre water bath has been designed to offer an economical yet comprehensive solution for heating. View Details

Stainless Steel Test Tube Rack No. of Holes: 12 Holes View Details

These Analogue water baths are designed for general use and are economically priced without compromising quality. View Details

These Analogue water baths are designed for general use and are economically priced without compromising quality. View Details

These Analogue water baths are designed for general use and are economically priced without compromising quality. View Details

Material: Polypropylene Polypropylene Spheres provides a blanket of hollow spheres to reduce View Details

Hinged Gable Lids help to reduce water evaporation, assists in keeping samples and water free from contamination and saves energy. View Details

Featuring heater and timer controls with ultrasonic boost, degas and sweep functions. View Details

This industrial strength ultrasonic bath is designed for demanding applications and suitable for continuous operation. View Details

Featuring heater and timer controls with ultrasonic boost, degas and sweep functions. View Details

These water baths provide a stable temperature environment ideal for meeting quality control requirements. View Details

Triple Baths feature three independently controlled unstirred baths in one space saving unit. View Details

Spare water bath kit for Nanoheat Hotplate. Image representative of range. View Details

Comprising of a high quality corrosion resistant seamless stainless steel tank View Details

Bath has a stainless steel dome cover, perforated and removable shelves View Details

1 kW heater with cut-out device. Complete with connector plug and 1 meter of 3 core cable View Details

Hemispherical, made of thick copper sheet, with a set of concentric rings and 2 handles. View Details

Complete with connector plug and 1 meter of 3 core cable. View Details

Made with rubber lined, diecast jaws. Clamping rod operates through swivels mounted neatly in the jaws. View Details

Four prong, cork jaw clamp finished in high quality blue coating. View Details

Diecast alloy clamp retort with rubber-lined jaws and bosshead which accommodates rods up to 15mm dia. View Details

Diecast alloy clamp retort with cork-lined jaws and bosshead which accommodates rods up to 15mm dia. View Details

Span width d independently adjustable by 2 regulating screws. View Details

Span width d independently adjustable by 2 regulating screws. View Details

Retort clamp standard, stainless steel Round Jaws View Details

Zinc, die-cast, to hold rods up to 16mm. Diameter: 16mm View Details

For use with retort stand rods. Die-cast alloy accepts rods up to 16.5mm View Details

Material: Coated Aluminium Color: Black Doublehead, die-cast bossheads View Details

Safety screw with swiveling steel head. Material: 18/10 Stainless View Details

With hexagon socket screws. Combination possibility for adjustment of the angle from 0-360° View Details

Due to its strength, suitable for multilevel and three dimension constructions. View Details

Screw types: Heart screw Material: 18/10 Stainless View Details

Screw types: Ring screw Socket screw View Details

Screw types: Ring screw Socket screw View Details

Screw types: Thumb screw Material: Tempered cast iron View Details

Screw types: Heart screw Material: 18/10 Stainless View Details

Screw types: Safety screw type heart Thumb screw View Details

Screw types: Socket screw Heart screw View Details

Screw types: Safety screw type, heart Thumb screw View Details

Screw types: Socket screw Heart screw View Details

Robust shock resistant design allow use in demanding environments View Details

Infrared (IR) clinical thermometer, digital, handheld, minimmal range 34– 42 °C. View Details

The unique models, Laboratory Equipments Ambala based on Bohr's atomic model, allow students to make their own atoms View Details

All parts are separate; use only the parts needed for each situation. Just place the parts directly on the whiteboard when teaching. View Details

Laboratory Equipments Ambala, This whole class set contains one Atomic structure Demonstration kit View Details

This burette rack is a natural wood and metal construction it holds up to 12 burettes of up to 20 mm diameter View Details

Simple clamping action for use with one or two burettes. Economical die cast metal burette holder View Details

All parts are interchangeable. Hardwood complete with base and rod. View Details

Strong burette holder with alloy cast jaws with plastic ends to clamp a single burette. View Details

Laboratory Equipments Ambala, A clamp consisting of two plastic coated spring clips mounted 50mm apart on a stainless steel plate with rod. View Details

Suitable for all burettes up to 100ml capacity. A pattern unit comprising a high strength alloy casting with plastic jaws. View Details

Suitable for 12mm diameter retort rods only. A one piece clamp moulded from acetal View Details

All parts are interchangeable. Hardwood complete with base and rod. View Details

This useful washing/rinsing system allows pipettes and burettes to be automatically rinsed when connected to a tap and drain outlet. View Details

Handheld, portable, battery powered pulse oximeter, displaying patientoxygen saturation View Details

Foetal Heart Rate (FHR) doppler detector, with speaker, handheld, battery powered, with accessories. View Details

Electrocardiogram (ECG) digital monitor and recorder, 12-leads detection, multi-channel recording, portable View Details

Cardiotocograph (CTG monitor), normal and twins Foetal Heart Rate (FHR) and Uterine Contraction View Details

Laboratory Equipments Ambala Tape measure, vinyl-coated, 1.5m View Details

Wooden tongue depressor, with rounded extremities. View Details

Otoscope Set for visual examination of the eardrum and the outer ear View Details

Ophthalmoscope Set to visualize the interior of the eye View Details

Laboratory Equipments Ambala Stethoscope foetal Pinard used to auscultate the heart sounds of the embryo in the womb. View Details

Laboratory Equipments Ambala Scanner, ultrasound, mobile, with accessories to be used in health infrastructures View Details

Clinical thermometer, electronic, digital, glass and mercury free. View Details

Sphygmomanometer Adult Aneroid sphygmomanometer. Measures blood pressure non-invasively by displaying View Details

Binaural Stethoscope Complete: A mechanical listening device designed for listening to sounds from the heart and lungs. View Details

Laboratory Equipments Ambala Pulse-oximeter, SpO2 and HR detection, portable, battery powered, with accessories View Details

10 person first aid kit includes: 20 assorted plasters 2 sterile eyepads View Details

Bag, urine, collecting, 2000ml Syringe, feeding, 50ml, catheter tip, ster View Details

The Basic Resuscitation kit consists of basic equipment to facilitate resuscitation Laboratory Equipments Ambala for adult View Details

This set should be considered part of any minimal investment View Details

This set should be considered part of any minimal investment View Details

This set should be considered part of any minimal investment in a health facility with surgical/obstetrical View Details

This set should be considered part of any minimal investment in a health facility with obstetrical activities. View Details

The set should be considered part of any minimal investment in a health facility View Details

The set should be considered part of any minimal investment in a health facility and dispensary. View Details

Gloves , w/opowder, nitr, M, disp, box/100 Tape, adhesive, Z.O., 2.5cmx5m View Details

Material: Needle: Stainless steel Base and protective cap: Laboratory Equipments Ambala medical grade plastic. View Details

Syringe capacity: 5ml Syringe graduation: Graduated scale on the barrel, easy to read View Details

Infusion giving set, with burette, sterile, single use View Details

Perforator: Sharp piercing device with protective cap. View Details

Laboratory Equipments Ambala Sturdy, ready to use manual blood lancet View Details

Needle with base (Luer type fitting), and protective cap. View Details

Material: Needle: Stainless steel View Details

Syringe, 10ml, sterile, with bi-packed needle, 21G (0.80 x 38-40mm), disposable. View Details

Syringe, three pieces: barrel with luer nozzle, stopper and piston/plunger. View Details

Syringe, two pieces: barrel with Luer nozzle and piston/plunger or three pieces: View Details

Syringe, two pieces: Laboratory Equipments Ambala barrel with Luer nozzle and piston/plunger or three pieces View Details

Syringe, two pieces: barrel with Luer nozzle and piston/plunger or three pieces View Details

Insulin Syringe, 1ml, U-100, three pieces: barrel with nozzle View Details

Surgical gown Raglan long sleeves, non-deforming cuffs in jersey: 12cm (+/- 10%) View Details

Unisex scrub pant Trousers with drawstring waist closure View Details

Unisex scrub pant Trousers with drawstring waist closure View Details

Unisex scrub top “V-shaped” neck tunic Easy to slip View Details

Unisex scrub top “V-shaped” neck tunic Washing: normal; withstands boiling View Details

Laboratory Equipments Ambala Unisex medical coat with long sleeves View Details

Unisex medical coat with long sleeves Notched lapel collar View Details

Laboratory Equipments Ambala Unisex medical coat with long sleeves Notched lapel collar View Details

Surgical drape, square of fabric with 4 hemmed borders View Details

Unisex patient gown, standard cut Straight back closure with ties View Details

Body bag: With zipper, includes an absorbent pad prefixed inside of the body bag View Details

With zipper, includes an absorbent pad prefixed inside of the body bag and padded View Details

Laboratory Equipments Ambala Round waste receptacle with foot pedal opens self-closing lid, stainless steel. View Details

Material: Laboratory Equipments Ambala Polypropylene, autoclavable. View Details

Laboratory Equipments Ambala Austenitic stainless steel composition: 18 to 20% chromium, 8 to 10% nickel. View Details

Material: Polypropylene, autoclavable. Round bowl. View Details

Material: Austenitic stainless steel composition: 18 to 20% chromium, 8 to 10% nickel. View Details

Material: Austenitic stainless steel; composition: 18 to 20% chromium, 8 to 10% nickel View Details

Seamless tray, rectangular with rounded corners, stainless smooth surface View Details

Material: Polypropylene, autoclavable. Round container with base. View Details

Material: Polypropylene, autoclavable. Measuring Jug with handle and indelible View Details

Laboratory Equipments Ambala Nylon brush with soft bristles for scrubbing hands prior to surgical intervention. View Details

Laboratory Equipments Ambala Safety Pin Medium Size for securing wraps and bandages. View Details

Material: Plastic. Capacity: 250 ml. View Details

Laboratory Equipments Ambala Plastic Bottle suitable for storing chlorine View Details

Laboratory Equipments Ambala Urethral catheter without balloon, nelaton tip. Length expressed in cm. View Details

Catheter, Foley, CH18, sterile, disposable View Details

Laboratory Equipments Ambala Syringe, feeding, 50ml, catheter tip, sterile View Details

Laboratory Equipments Ambala Syringe, feeding, 50ml, Luer tip, sterile View Details

Laboratory Equipments Ambala Sterile enteral feeding catheter for single use. View Details

Urine collection bag. Kink resistant and transparent plastic inlet tube, length 85-95 cm, with universal View Details

Drawsheet, plastic, 90 x 180 cm. View Details

Elastic strip solid Length: 50-75 cm View Details

Plastic Tablet bag, sealable with interlock type closure, 10 x 16cm, pack of 100 View Details

Laboratory Equipments Ambala Pair of surgical gloves, anatomically shaped: 1 right-handed, 1 left-handed. View Details

Laboratory Equipments Ambala Cleaning gloves, heavy-duty, reusable, for Sturdy cleaning use in both Households View Details

Examination glove, ambidextrous shape: fits either hand. View Details

Pair of gynaecological gloves with long cuff, anatomically shaped View Details

Material: nitrile Powder free View Details

Laboratory Equipments Ambala Side tubes fit with feet; raising stretcher from floor level, preferably with extractable handles. View Details

Bed screen mounted on swivel castors; positioned in broad stance for good stability. View Details

Laboratory Equipments Ambala Robust mechanics allow for manual View Details

Laboratory Equipments Ambala Gear, lever and crank mechanisms are all manually operated, no gas springs View Details

Mattress is shaped to fit worktable top, 3 sides have raised edges View Details

Laboratory Equipments Ambala Mounted on 4 sturdy supports, all finished with height adjustable feet View Details

Transfer bars connect all lower distal portions of the 4 castors, providing maximal structural strength View Details

Mounted on robust supporting legs spaciously arranged for maximal stability View Details

Heavy carriage mounted on 5 swivel castors Lower-end support column is deep View Details

Doors are triple hinged, and lockable with key Controlled medicines compartment door, double hinged View Details

Wheeled partitions with a plain white infill panel to provide booth privacy and protection. View Details

Strip mop, 130g, highly absorbent, does not shrink significantly, launderable at 30°C. View Details

Anodised Aluminium threaded handle with a coloured grip, for use with all Hygiene Range products. View Details

Frame: chrome plated or epoxy coated tubular steel View Details

Laboratory Equipments Ambala Breast Pump for milk extraction and collection View Details

Alkaline Battery Dry Cell "C" type, 1.5V, 26 x 50mm high, C. View Details

Vacuum extractor, Bird with anterior and posterior cups, manual, complete set View Details

Electrosurgical unit, for general surgery, mono- and bi-polar, with accessories View Details

Examination light, halogen, mobile, AC powered View Details

Surgical light, halogen, mobile, AC and battery powered View Details

Material: Martensitic steel (quenched, magnetic steel) View Details

Towel clamp, springy. Material: Martensitic steel (quenched, magnetic steel). View Details

Material: Martensitic steel (quenched, magnetic steel). View Details

Material: Martensitic steel (quenched, magnetic steel). View Details

Material: Austenitic steel (non quenched, non magnetic steel). View Details

Material: Martensitic steel (quenched, magnetic steel). View Details

Material: Martensitic steel (quenched, magnetic steel). View Details

Material: Martensitic steel (quenched, magnetic steel). View Details

Material: Martensitic steel (quenched, magnetic steel). View Details

Material: Martensitic steel (quenched, magnetic steel). View Details

Medical gas flow meter to regulate and measure the flow rate of medical gas View Details

Laboratory Equipments Ambala Hand held, battery powered device that measures the oxygen concentration View Details

A sealed bottle of water inserted into a breathing circuit to add moisture to the breathing gases for administration View Details

Flow splitter for oxygen delivery, 5 outlets and 1 inlet, with independent flowmeters View Details

Face mask to provide oxygen at flow rates between 1 – 10 LPM. Allows for precise oxygen delivery View Details

Infusion pump, volumetric, single channel, AC and battery powered, with accessories View Details

Oxygen Concentrators are not suitable to be used as an oxygen source to other medical equipment providing respiratory View Details

Can be cut with scissors. Dimensions: 200 x 200mm. View Details

The plates can be rolled to fit into chromatography cylinders. View Details

Two Heat settings 600 or 1200W. With detachable blow dry nozzle and automatic View Details

Laboratory Equipments Ambala Provides sufficient for approximately 500 ink spots. View Details

Stopcock bore 3mm. With 'Rotaflo' stopcock and porosity 'O' sintered disc. Socket 19/26. View Details

Laboratory Equipments Ambala Readings can be displayed as absorbance units or % transmission with one button push. View Details

The side tubes are graduated 0-50 x0.2 mL so that the volume of gas in each can be measured. View Details

These round electrodes will fit the electrode holder, the electrode connector and rubber stoppers with a hole. View Details

Laboratory Equipments Ambala Made from insulated brass, with a short length of carbon rod attached at the lower View Details

Embedded platinum electrodes are connected via 4mm sockets. View Details

The set contains various different electrodes, including zinc, lead, aluminium, carbon, tin, copper, nickel and iron. View Details

Laboratory Equipments Ambala Consisting of an inverted U-tube with its ends closed by sintered discs. View Details

The electrodes must be sanded clean between each attempt. View Details

Electrical contact is made through the crocodile clips and a piece of insulating material between the electrodes prevents short circuiting. View Details

The holder contact screw has a socket for connecting 4 mm safety jacks. O.D. 25 mm, I.D. 12 mm. View Details

The brass connectors also resist corrosion and are compatible with the usual 4mm stackable type lab leads. View Details

The apparatus consists of a heavy-gauge copper outer vessel, which acts as the positive electrode View Details

Laboratory Equipments Ambala Shade 9 welding filter lenses, as recommended for safe viewing of burning magnesium View Details

Helium gas should not be inhaled and balloons should be inflated carefully to make maximum use of the gas. View Details

Laboratory Equipments Ambala Bottles require a control valve, which is interchangeable between bottles of different gases View Details

It features a balloon adaptor which prevents the escape of gas during the filling process. View Details

Laboratory Equipments Ambala Recommended solution for the 34 and 110 litre canisters View Details

The most economical solution for controlling the flow of gas (0.5 - 1.5L / minute) from these canisters. View Details

The valve is interchangeable between bottles of different gases. View Details

Laboratory Equipments Ambala Outside diameter 1.8-2.0 mm. View Details

Built-in illumination and viewing magnifying lens give clear viewing of samples. View Details

The heating rate can be adjusted manually between 1 to 20°C/min, and for rapid heating View Details

Laboratory Equipments Ambala, An aluminium block with an angled hole drilled to accept a thermometer View Details

Durable material will withstand heavy classroom use. A large wall chart printed in four colours to ensure View Details
Laboratory Equipments Ambala set contains a total of 34 atoms and comes with both standard open and compact View Details
The stabilizing effect of the “neutrons” is illustrated by placing them between the “protons” View Details
Laboratory Equipments Ambala For structures of sulphur, diamond and graphite, metals, acids and bases View Details
The 4 x 4 x 4 Lattice contains 64 ions (32 Sodium and 32 Chlorine) and the 3 x 3 x 3 Lattice contains 27 ions View Details
Features include: 2 Magnets in oxygen atom, so students can make ice; Permanently embedded magnets View Details
If the model is held at arm’s length (easier on a firm board) and shaken lightly View Details
Laboratory Equipments Ambala Set includes brass, iron, copper, aluminium, hardwood (beech), softwood (pine), nylon, PVC and acrylic. View Details
Pink and purple coloured pear shaped lobes represent the two wave phases, positive and negative of the p and d atomic orbitals. View Details
Laboratory Equipments Ambala Comprises six 100 g, 16 mm diameter cylinders of brass, lead View Details
Laboratory Equipments Ambala Consisting of: Spheres: 6 Carbon, 7 Oxygen, 3 Nitrogen View Details
The different shapes are examples of the orientations of the bonds and cover coordination numbers 1 to 6. View Details
Laboratory Equipments Ambala Consisting of: Spheres: 21 Carbon, 13 Oxygen, 25 Hydrogen View Details
Laboratory Equipments Ambala Study the unique molecular structure of carbon nanotubes. View Details
The set contains four element specimens: copper, iron, zinc and aluminium View Details
A sturdy, compact pH meter which gives fast, accurate readings View Details
Simply split the capsule in two and add to 100ml of deionised/distilled water and mix. View Details
They have the unique feature of a retractable electrode. These pocket pH meters are easy to use View Details
A useful cleaning solution for pH electrodes when used in food, and specifically dairy products. View Details
A bench pH meter which is stable and easy for students to use. View Details
Auto shut off (after 8 mins) Automatic 1 or 2 point calibration View Details
Laboratory Equipments Ambala Plastic bottles, air-tight with gromit to stop pH electrodes from drying out View Details

Rotating Shaft -- Material Stainless Steel View Details

220v stabilized AC supply with earthing connection. View Details

230 V, A.C. stabilized supply along with earthing connection. View Details

Bi-filler Suspension. View Details

It consists of 3 white acrylic discs A, B, C. having pitch circle diameter 450 mm, 300 mm & 200 mm respectively. View Details

The board shows the demonstration of this phenomenon of Interference and Undercutting. View Details

Floor Space -1.5 m X 1.5 m. View Details

230 V.AC stabilized power supply. View Details

Electric Connections : A.C Single Phase, 230v. supply with ear thing. View Details

The weights are Zink Iron for long term use. View Details

A machine-tool dynamometer is a multi-component dynamometer that is used to measure forces during the use of the machine tool. View Details

230 volts, single phase, 50 Hz stabilized power supply. View Details

230 volts, single phase, 50 Hz stabilized power supply. View Details

Mechanical sensing unit or Tool Holder with string gauges. With H.S.S. tool of ½“ size. View Details

The dynamometer is calibrated at factory with help of proving ring and readings are directly in the from of kg. View Details

The whole Set-up is well designed and arranged in a good quality painted Structure. View Details

To determine the Co-efficient of discharged through Venturimeter and Orificemeter View Details

To determine loss of head in the fitting at various water flow rates. View Details

To determine the losses due to fiction in pipes View Details

The whole Set-up is well designed and arranged in a good quality painted Structure View Details

The whole Set-up is well designed and arranged in a good quality painted Structure. View Details

The whole Set-up is well designed and arranged in a good quality painted Structure View Details

Height of Overflow point : 150mm View Details

A measuring tank is provided to measure the discharge. A gauge for measuring X and Y co-ordinates of jet from the orifice is provided, which is used to calculate Cv of orifice. View Details

The unit demonstrates some of the flow measurement devices. View Details

230 v, 5 amp supply with earthing connection View Details

Pressure Gauge is fitted at the Inlet of the turbine to measure the total supply head to the turbine. View Details

The present Set-up consists of a runner. View Details

To determine the Output Power of Kaplan Turbine View Details

440 v, 15 A, stabilized three phase A.C. supply. View Details

Stop Watch : Electronic View Details

The whole Set-up is well designed and arranged in a good quality painted structure. View Details

To plot Head vs. Discharge, Pump efficiency vs. Discharge View Details

Water Supply: Tap water connection ½ “ BSP Distilled water @ 90 Ltrs. (Optional) View Details

Water Supply: Tap water connection ½ “BSP, Distilled water @ 90 Ltrs. (Optional) View Details

Water Supply: Tap water connection ½ “ BSP, Distilled water @ 90 Ltrs. (Optional) View Details

The side walls of the experimental section are made of tempered glass, which allows excellent observation of the experiments. View Details

Weir plate made of stainless-steel width : 80mm View Details

Weir body with sealing lips View Details

Weir body with sealing lips View Details

Side walls made of tempered glass for excellent observation of the experiments View Details

Contains a cuboid shaped weir body with a sharp edge. View Details

In the case of stationary flow, the streamlines coincide with the flow lines, i.e. the paths of motion of the individual fluids. View Details

It increase with the square of the velocity View Details
Floor Area-1.5 Meter X 1 Meter X 0.5 Meter High View Details
Water filled heat sinks at upper end of each pipe. View Details
230 V, 5 Amp., A.C., Supply with earthing connection. View Details
230v, 5A, AC, electric supply with earthing connection View Details
Bench area of about 1m. x 0.75 m. at working height. View Details
Thus the specific heat of air can be found out. View Details
Water flow at the rate of 4 to 5 lit. per min. View Details
230v, 15A, AC supply with earthing connection View Details
230v, 15A, AC, electric supply with earthing connection View Details
220v, ISA, stabilized single-phase supply. View Details
Inner copper tube I.D, 12.7mm. and outer G. I. Pipe I. D. 15mm. approx. and 1.5m. length. View Details
Water supply at the rate of about 10 lit/min at constant heat. View Details
Water supply at the rate of about 10 lit/min at constant heat. View Details
A panel comprising of controls and measurements is provided, which provides easy operation and sturdy mounting of unit. View Details

Math teaching kit packed in a metal box. Primary mathematics teaching aids kit View Details
.jpg)
Note:
View Details

































.jpg)
















































.png)
 (1).png)
 (1).png)

 (1).png)
.png)
.png)
.png)
.jpg)
.jpg)
.png)
.png)
 (1).png)
.jpg)
.png)
.jpg)
.png)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
 (1).png)
.png)
 (1).png)
 (1).png)
 (1).png)
.jpg)
 (1).png)
 (1).png)
.jpg)
 (1).png)
 (1).png)
 (1).png)
 (1).png)
.png)
.jpg)
.jpg)
 (1)-Photoroom (1).png)
.png)
.png)
 (1).png)
 (1).png)
 (1).png)
 (1).png)
-Photoroom (1).png)
.jpg)
 (1).png)
 (1).png)
 (1).png)
 (1).png)
.png)
-Photoroom (1).png)
.jpg)
 (1).png)
.jpg)
.jpg)
.jpg)
.jpg)
 (1).png)
-Photoroom (1).png)
.jpg)
.jpg)
 (1).png)
 (1).png)
 (1).png)
 (1).png)
.jpg)
 (1).png)
 (1).png)
.jpg)
.jpg)
 (1).png)
 (1).png)
 (1).png)
.png)
.jpg)
 (1).png)
.jpg)
 (1).jpg)
.jpeg)
.jpg)
.jpg)
 (1).png)
.png)
.jpg)
.jpg)
 (1).png)
 (1).png)
.jpg)
.jpeg)
 (1).png)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpeg)
 (2).png)
.png)
.jpg)
 (1).png)
 (1).jpg)
.png)
.png)
.png)
.jpg)
.png)
.png)
 (1).png)
.jpg)
 (2).png)
.jpg)
.png)
 (1).png)
.png)
 (1).png)
.jpg)
.png)
.png)
.png)
.jpg)
 (1).png)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.png)
.jpg)
.jpg)
.jpeg)
.jpeg)
.png)
.png)
.png)
.png)
.png)
 (1).png)
 (1).png)
.png)
.png)
.jpg)
.jpeg)
.jpeg)
 (1).png)
.jpg)
.jpg)
.jpg)
 (1).png)
 (1).png)
 (1).png)
 (1).png)
 (1).png)
-Photoroom (1).png)
 (1).png)
 (1).png)
.jpg)
.jpg)
.jpg)
.png)
 (1).png)
 (1).png)
 (1).png)
 (1).png)
 (1).png)
.jpg)
.jpeg)
 (1).png)
 (2).png)
.jpg)
.jpeg)
 (1).png)
.jpg)
 (1).png)
.jpg)
 (1).png)
.jpg)
.jpeg)
 (1).png)
 (1).png)
 (1).png)
-Photoroom (1).png)
-Photoroom.png)
 (1).jpg)
 (1).png)
 (1).png)
.png)
.jpg)
.png)
.jpg)
.jpg)
 (1).png)
.jpg)
.png)
.jpg)
 (1).png)
 (1).png)
 (1).png)
 (1).png)
 (1).png)
.png)
.jpg)
.jpg)