• +91-8569909696

Experimental Flume Flow Channel Apparatus Manufacturer,Supplier and Exporter in Ambala

Experimental Flume Flow Channel Apparatus

Product Code : EL-EFFCA-11061
Lab Equipment Ambala is a leading Experimental Flume Flow Channel Apparatus Manufacturer,and suppliers in India, Experimental Flume Flow Channel Apparatus Manufacturer,and suppliers in South Africa.Experimental Flume Flow Channel Apparatus Suppliers in Mozambique,Experimental Flume Flow Channel Apparatus A quality product from Lab Equipment Ambala ideal for use in School Laboratories in developing countries of Asia, Africa and South Africa in Supplier Kenya, Southern African region, Botswana, Lesotho, Malawi, Angola, Namibia, Zambia, Zimbabwe. Djibouti, Ethiopia,Madagascar, Mauritius, Rwanda, Seychelles, Tanzania and Uganda.

SPECIFICATIONS:
Basic principles of open-channel flow
Experimental flume with experimental section, inlet and outlet element and closed water circuit
Length of the experimental section 2.5m or 5m with extension element.
Smoothly adjustable inclination of the experimental section
Experimental section with 10 evenly spaced threaded holes on the bottom for installing models or for water level measurement using pressure
Side walls of the experimental section are made of tempered glass for excellent observation of the experiments
All surfaces in contact with water are made of corrosion-resistant materials
Flow-optimized inlet element for low-turbulence entry into the experimental section
Closed water circuit with water tank, pump, rotameter and manual flow adjustment
Models from all fields of hydraulic engineering available as accessories

Description :-
The experimental flume has a closed water circuit. 
The cross-section of the experimental section is 86x300mm. 
The experimental section is 2.5m long and can be increased to 5m with the help of extension element. 
The side walls of the experimental section are made of tempered glass, which allows excellent observation of the experiments. 
All components that come into contact with water are made of corrosion-resistant materials (stainless steel, glass reinforced plastic). 
The inlet element is designed so that the flow enters the experimental section with very little turbulence.
The inclination of the experimental flume can be finely adjusted to allow simulation of slope and to create a uniform flow at a constant discharge depth.
A wide selection of models, such as weirs, piers, flow-measuring flumes or a wave generator are available as accessories and ensure a comprehensive programme of experiments. 
Most models are quickly and safely bolted to the bottom of the experimental section.

TECHNICAL DATA:
EXPERIMENTAL SECTION
 

Length

:

2.5m and extendable up to 5 m with extension element.

Thickness

:

8 mm

flow cross-section WxH

:

86x300mm

inclination adjustment

:

-0.5…+3%

Tank

:

280 L

Side walls made of transparent toughened glass

:

 

PUMP :-

High pressure centrifugal pump

Type

:

0.75MI – 230V/50 Hz

Power consumption

:

1kW

Max. flow rate

:

15 m3/h

Max. head

:

21 m

Outer casing

:

1.4301

Lower casing

:

1.4301

Impeller

:

1.4301

Shaft

:

1.4301

MEASURING RANGES :-

Flow rate

:

0…10m3/h

   

Office Address

Works: Block-10 Naraingarh Chowk Crossing, Baldev Nagar,
Ambala, Haryana 134003,

[email protected]

+91-8569909696

Follow Us